Waterproof
Scheduled Timing Report
Motion Detection
Low Battery Alarm
Removal Alert
.png){kind=icon}
Data Security (MD5/AES)
Emergency Button
Light Sensor
USB Charging
Standby Time (2 hours active tracking per day)
10 Min Reporting
5 Min Reporting
1 Min Reporting
85 Days
45 Days
18 Days
Specifications
General Specifications
Operating Temperature
-20°C ~ +60°C (-4°F ~ 140°F)
Data Communication
Magnetic USB Cable
(Recommend using 5V 1A Adapter, 10 Hours Charging)
Standby Time
(2 Hours Active Tracking Per Day)
10 minutes reporting: 85 days
5 minutes reporting: 45 Days
1 minute reporting: 18 Days
Battery
Rechargeable Li-Polymer 4800 mAh/3.7V
Weight
195g
Dimensions
2.7in x 4.9in x 0.91in
Waterproof
IP66
Interfaces
Temperature Sensor
1 Temperature Sensor
Light Sensor
2 light sensors (front and back)
Physical Power Switch
1
FOTA
Yes
Indicator LED
Network, GNSS and Battery level
Network, GNSS Antenna
Internal only
Charging and Data Transmission
4 Pin port with magnet
Air Interface Protocol
Motion Detection
Motion alarm based on internal 3-axix accelerometer
SOS/Emergency Alarm
SOS alarm via pressing function button
Power On/Off Report
Report when the device is powerd on and off
Low Power Alarm
Sending alarm when battery is low
Geo-fence
Support up to 64 internal geo-fence regions
Scheduled Timing Report
Report position and status at present intervals
Protocol Check & Encryption Support
MD5/AES256
Transmit Protocol
TCP, UDP, MQTT, SMS
GNSS Specifications
Standalone TTFF
Cold Start: < 29s
Warm start: < 27s
Hot Start: < 1s
Position Accuracy
Autonomous <2m
Sensitivity
Cold Start: -149 dBm
Tracking: -163 dBm
Receiver Type
33 tracking / 99 acquisitions - channel GNSS receiver
Parallel GNSS
GPS+Glonass+Galileo+Beidou
GNSS Chipet
Qualcomm Gen 8C GNSS receiver